Coolerguys Triple 120mm Fan Cooling Kit with Programmable Thermal Controller GT Series

840556022404

We also have kits with a as well as with (always on, great to use with switched AC powered outlets)

All parts in our kits come with a 3-year replacement warranty at no cost to you

This particular *kit is for a Three fan unit meant to cool your cabinet, multimedia center, aquarium, home grow op, brewing project or whatever else that may need cooling, the only limit is your imagination!
These fans move a combined 138 cubic feet (WxHxD) of air per minute (CFM) which is good for 2-6 components (up to 20 cubic feet of space with 2-4 shelves), this is just a general rule of thumb and it assumes you have adequate space for air to flow in from, and ventilation between shelving, we're currently working on an in-depth guide to airflow and cooling however in the meantime if you have questions we're here to

Can be mounted on any side of a cabinet, where room permits (cutout dimensions below). Insert completed cooler assembly in the hole and attach with appropriate screws. The fan can be set to be either an intake or exhaust, simply mount the fan to the bracket pointing in the desired direction before installing (if you are looking at the label the air will flow towards you)
If you need additional information you can !

INCLUDES:
(3)
This Dual Ball Bearing Nidec Fan is rated to last 100,000 hours running 365/24/7 (Over 11 years!)
The fan has a 30" long cord if you need to extend this length we have  


This controller comes with a 32" long waterproof probe, place where you'd like to monitor the temperature, when the temperature reaches the temperature you have programmed as the "On" setting the fan and anything else plugged into the unit will be activated until the temperature falls below the programmed "Off" setting.
It natively supports up to 4 3pin connections (12v only) but can handle more with the  (maximum 3A).
Comes with our  so you can mount the display if you'd like.

Temperatures above are ( /- 1° F) / Programmable range of 40F (4C) to 145F (63C) / LED display can be toggled on/off

All necessary screws, cables, and fasteners are included to assemble, install and operate this unit.

If you'd like to add additional brackets and fans to this kit you can find them , non-thermal controlled kits only have enough ports for the fans which come with it. The standard thermal controlled and programmable controllers have 4 native ports, if you need more ports for fans we have adapters .

Completed Fan and Bracket Dimensions when assembled using the included parts:
17.75" x 6.5" x 1.38" (159 x 450 x 35mm)

Cutout size:
16" x 5" (400 x 130mm)

(574 kb pdf)

Total Kit Contents:
(1) Coolerguys 100-240V AC To 12V DC Power Supply
(3)
(1) Triple Metal Mounting Bracket
(1) y
(1) Controller side mount bracket
(3)
(3)
(24) 
(4) #6 - 1/2" black Cabinet screw

*This is a kit and some assembly is required.

FAN SPECIFICATIONS:
Fan Speed: 1450 RPM
Operation Voltage: DC 12 Volts
Input current: 0.049 Amp Draw
Operation temperature: -10 to 65 C
Storage temperature: -40 to 70 C
Airflow: 138 CFM
Noise Level: 23.3dBA
Lifespan is based on the operating temperature of 95F (35C)

We trust in our products at Coolerguys and test everything that is sent out! We happily extend a three-year replacement warranty to all our Coolerguys branded products.